One of the most common plumbing issues that homeowners face in Melbourne is blocked drains. Drainage pipes are designed to carry wastewater from different plumbing fixtures in the house to the municipal sewage lines. Compared to other pipes, however, the drainage pipe is slightly larger in diameter so that it can accommodate semi solids as well. Most people don’t really care about what they throw down the drain. Plumbers have often talked about the weird household waste that they have found stuck in drainage pipes over the years.

If something is stuck in your drainage pipe, the signs will quickly become apparent. You should take immediate action if you can notice these signs, as there’s a risk that the drain pipe might become completely blocked, thus risking a pipe burst. In the case that a drain pipe gets completely blocked, there’s a major risk that the pipe will burst due to the buildup of pressure, creating a number of serious problems. Naturally, this would prove to be a major sanitary hazard, and the dirty water would also cause a very pungent odour to rise up.

The usual signs of a drain blockage include a gargling sound every time the drain flushes or water getting held back in the drains before eventually flushing. Ideally, if you can notice the signs of a blockage, you should immediately call a plumber. Here are some of the most obvious causes of a blocked drain.

Solid Items

One of the most obvious causes of blocked drains in Melbourne is solid items stuck in the drain pipes. In most cases, the solid items easily pass through the drain pipes and into the much larger sewage lines, however, if something gets stuck in the pipes, it will considerably affect the flow of water through the pipes. With the passage of time, the solid item will start capturing other items as well, like hair, thus causing the blockage to grow.

Fatty and Oily Substances

This is also a very common reason for drain blockages. If you just dispel the oil used in cooking through the kitchen sink, there’s a very high chance that it might get stuck around the sides of the drain pipes and eventually harden. Oily and fatty substances can harden over time and can completely block the drain pipe in different locations. You should never let them pass through the sink.

Tips for Unclogging the Drain

The most common method of unclogging the drain pipe is to use a plunger. Plungers are good if the blockage is close to the opening, but if the blockage is deeper in the drain pipes, however, you will need to call a local plumber. They will send a micro camera through the drain pipes to determine the exact position of the blockage. Once the point of blockage has been determined, the company will use jet washing methods to clean out the blockage. If that doesn’t work, acid might be used to melt the blockage.