Whilst some homeowners believe that they can install an electric cooker themselves, this type of installation is not that simple. If you do not use the services of a qualified electrician, you can run into some electrical difficulties in connection with the installation. These difficulties can come in the form of mistakes with the cable sizing, cable run length, and fuse board. Not only that, but the circuit should be tested upon completion of the installation.

Review Your Installation Needs

That is because the fitting of an electric cooker must be performed using its own circuit. Installing a new circuit then is not generally permitted except by electricians who are duly qualified. Another reason why it is important to use the services of County Durham electricians is because of the large amount of electricity that the appliance draws. Generally, a cooker needs a bigger fuse, double-pole isolating switch, and thicker cable.

Playing It Safe Electrically

Normally, during the installation of the switch, the connection for the live wire is broken. When a double-pole switch is used, the connection is disrupted to both the neutral and live wire. Therefore, there is no real concern that a residual amount of current will cause an electric shock when the switch is off.

Because a cooker is on its own circuit, the cable runs from the consumer unit to the cooker by way of a switch. The cooker circuit, when linked, is on a radial circuit. When making a connection then, it is imperative that the right size of cable be used, as it is directly associated with the power emitted from the cooker.

Needless to say, the process can become quite involved, if not dangerous, without the assistance of a reliable electrician. Never leave anything to chance when it comes to wiring. Always consult with an electrician to get your questions answered or to have your appliances or wiring installed using the proper measures.