Rubber Roofing

There is no denying that the roof is one of the most important parts of any house. As the primary covering system, it serves a number of useful roles, ranging from aesthetic to weatherproofing. However, frequent exposure to the elements could cause roofs to eventually wear out. When that happens, leaks could occur, which when left unchecked can cause significant damage not only to your roof, but to the structure of your home.

When leaks have already affected your home’s roofing system and repairs are no longer effective to address the problem at hand, there is no better time to replace it. Fortunately, options for roofing systems are abundant, ranging from traditional asphalt shingles to energy efficient metal units. However, if you want a roofing system that will provide your home with impenetrable seal against leaks, you might want to consider using rubber roofing for your replacement. You’ll also want to consider looking into a reputable roofing company like Greeley Roofing that knows what they’re doing when it comes to roofing repairs.

Rubber Roofing

Rubber roofing in brief

A rubber roof system is basically made from a synthetic material referred to as ethylene propylene diene monomer (EPDM). It is usually manufactured as a single-ply membrane purchasable in rolls, but can also be bought in the form of shingles, which look much like slate shingles.

Once limited to flat roofs for commercial structures, rubber roofs are starting to become popular for residential applications. This can be credited to their excellent characteristics, which cannot be found on any other roofing system. They are lightweight and durable and their flexible nature allows them to be integrated to any roof shape and design and work for most styles of homes.

Why use rubber roofing?

There are a number of good reasons rubber roofing makes for an excellent roofing system for your home. To start with, they are a low-cost alternative to more expensive yet finicky roofing materials like wood or slate. In fact, this roofing system boasts the lowest installation cost per square foot, with an average cost of £1.52 to £3 per square foot. The process of installation can also be tackled as a DIY project, allowing you to save on labour cost. Long term use of this roofing system could also provide you with economy of ownership as it does not require the sort of expensive regular maintenance other roofing systems will require.

In terms of durability, the average life span of rubber roofing is anywhere between 10 and 30 years, depending upon the climate and weather it is exposed to. As a matter of fact, one long-term weathering study of roofing systems completed recently has found that some 30-year old rubber roofs can still hold up well against the elements despite their age, which only proves that rubber roofing system is hardwearing.

Cost-effectiveness and durability aside, rubber roofing is also an environmentally conscious choice you can make. This is due to the fact that most rolls and shingles sold in the market today are made from recycled tires, slate dust and saw dust, which are more environmentally-friendly than other roofing materials. It can also be recycled to other usable materials once it reaches the end of its service life, thereby preventing it from going into the landfill.

Installing rubber roofing

The installation of rubber roofing is pretty straightforward, especially if you will use rolls instead of shingles. Before embarking on the installation, however, it is necessary to strip your roof down to a plywood base, as some manufacturers do not recognize warranties if the rubber roof is directly installed on top of an existing roof.

Once you are done stripping down your roof, measure and cut the roll to the shape of your roof, taking great care to trim around areas like vents, chimney and antenna. After which, rid your roof of dirt, dust and debris by sweeping the entire area and then apply the adhesive. Place the rubber across the adhesive, do trims where necessary, and take note of air bubbles. Finally, allow the adhesive to bond before doing any adjustments.

Rubber roof care

As mentioned earlier, rubber roofing can last for years with less maintenance than other roofing materials. In fact, it could make do with nothing more than occasional sweeping and washing. However, in the event that the rubber shows signs of wear and tear due to faulty installation or thermal movement, you do not have to worry as the problem can be easily fixed. For leaks and cracks, you can patch them with latex tape or sealant. If portions of the roof are suffering from deeper cracks, though, patching with rubber shingles or small cuts of rubber roofing can immediately prevent them from getting worst.